Brother PR1055X Operation Manual page 42

■ Character pattern input keys
Memo
• If a key display is grayed out, you cannot use that
function with the selected pattern.
1 2 3
Display
No.
Key Name
1
Return to the previous screen.
Return key
2
Change the size of the character
patterns. To change the size of one
Size key
character, touch
The size of the selected character is
changed.
• Size of the small fonts
changed.
3
Change the layout of the character
patterns.
Array key • To arrange the character patterns on
an arc, touch
• To arrange the character patterns on
an incline, touch
counterclockwise.
•
40
C
B
A
0
9
8
4 5 6 7
D
Function
to display
and then select the character.
, ,
, , and cannot be
, , or
.
: Make the arc flatter.
: Make the arc rounder.
.
: Change the incline
: Change the incline clockwise.
: Reset the layout.
Display
No.
Key Name
4
Change the spacing of the character
patterns.
Character
•
spacing key
•
spacing.
• To change the spacing after one
character, touch
The spacing between the selected
character and the next character is
changed.
•
character up.
•
character down.
•
5
Switch alignment. This function is
available when multiple lines of
characters are input.
Alignment key
• : Right alignment
• : Left alignment
• : Center alignment
6
Change the font of the characters.
Depending on the font that was selected,
it may not be possible to change the
Font type key
font.
• To change the font of one character,
touch
then select the character. The font of
the selected character is changed.
Function
: Increase the character spacing.
: Decrease the character
to display
and then select the character.
: Move the one selected
: Move the one selected
: Reset the spacing.
to display and