Installing The Included Wide Table - Brother PR1055X Operation Manual

i Touch to select the next section of the pattern, and
then touch .
Touch , and then
j
k Hoop the fabric for the next design section aligning on
the alignment stitching. In this case, align the left side
of the hoop on the right side of the design section
f
embroidered in step
1 Alignment stitching
Note
• Make sure that the alignment stitching is
completely within the embroidery field. Set the
embroidery sheet inside the embroidery frame and
align the grid with the alignment stitching for easier
placement.
g j
l Repeat steps to
remaining sections of the pattern.
.
.
to embroider and combine the
INSTALLING THE INCLUDED WIDE
TABLE
CAUTION
• Be sure to install the wide table when using the
optional magnetic sash frame, jumbo frame,
border frame, quilt frame or flat frame. If these
frames are used without the wide table
installed, the weight of the frame and fabric
may cause the frame to slant and result in poor
embroidering quality.
Note
• When carrying the wide table, be sure to hold it
with both hands.
• Attach the wide table to the machine before
installing the embroidery frame.
• Do not place heavy objects on top of the installed
wide table or press down on it.
• Remove the wide table from the machine while
using embroidery frame that do no need to be used
with the wide table or while embroidering tubular
items, bags or caps. The embroidery frames for
these types of objects cannot be installed while the
wide table is attached to the machine.
Loosen the two thumb screws 5 to 6 turns.
a
ADVANCED EMBROIDERY
137
3