e
Touch
.
The screen for confirming the converted image
appears.
f
In the screen for confirming the converted image, you
can adjust the [Gray-Scale Detection level], the line
color and stitch type again, if necessary.
*
If you do not know how the settings should be
changed, first continue the operation without
specifying settings and check the results.
*
To display the image before being converted, touch
. Compare the images before and after
being converted, and then change the settings if
necessary.
After changes to the settings described above have
been applied,
to check that the image is as desired.
g
Touch
.
The pattern drawing screen appears.
If necessary, edit the scanned image.
h
*
After the scanned image is converted to stitching, it
appears as a background in the pattern drawing
screen. Use gauge 1 to adjust the transparency of
the background. Each touch of
background, making the line pattern darker. Each
touch of
darkens the background, making the
line pattern lighter.
changes to
. Touch
1
lightens the
Note
• During scanning, the small dots that appear and
unnecessary lines can be erased.
MY DESIGN CENTER
161
4