Table of Contents
Advertisement
c
Touch a number button (between
) to select the number of the needle
bar whose settings are to be specified.
The needle bar number for the thread color selected
b
in step
changes to the selected needle bar
number.
If the needle bar number was specified with
reserved needle bar settings, the color of the thread
spool on the left side changes to the specified thread
color, and the pattern in the pattern display area also
changes to the color of the specified needle bar.
2
1 Needle bar number specified with reserved needle
bar settings
2 Needle bar set to a different number (needle bar 5)
3 If a color is selected by touching this key, the
machine stops before sewing the selected color.
4 If a color is selected by touching this key, the
pattern parts with the selected color will not be
sewn.
• If 3 and 4 are both set for the same thread color, 4
will be given priority.
■ Initializing thread color settings
With the manual color sequence, the thread color
information on the machine can be initialized each
time a new pattern is selected, and then the needle
bars can be assigned. This allows the needle bar
settings to be specified without being affected by the
thread color information from the previous pattern.
Precautions on the manual color
sequence
■ When embroidering a pattern
containing 7 or more colors
With the manual color sequence, the machine does
not monitor the timing for replacing thread spools.
Since the machine does not automatically stop and
no message indicating that the thread spool be
changed appears, as with the normal needle bar
settings, follow the step
procedure described in either "Stopping the
machine at the next color change" or "Specifying
pause locations before embroidering" on page 118
to set the machine to stop with thread spools that
must be changed.
110
and
1
3
4
c
on
or the
page 110
Deselect Region Setting
The deselect region setting (which specifies that a
thread color will not to be sewn) can be applied to
a part of the pattern with a specific color. In this
way, you can arrange the sewn embroidery
without actually editing the pattern.
Specifying sewing of a specific
thread color to be skipped
a
In the embroidering settings screen, touch
.
A screen appears, allowing the needle bar numbers
to be selected.
b
From the thread color sequence display,
select the thread color that will not be
sewn.
• If the desired thread color is not displayed, use the
scroll bar on the right side to display it.
1 Scroll bar
The selected thread color is surrounded with a blue
frame.
1
Advertisement
Table of Contents
Troubleshooting
