Table of Contents
Advertisement
Always use the therapeutic pressure setting, as individually determined with the con-
figuration of the equipment and accessories.
Proper placement and positioning of the patient interface is critical to the consistent
operation of this equipment.
Handle the Vivo 2 with care.
Make sure to place and pack the device in a way that prevents unintentional start of
the machine.
Do not use the Vivo 2 with nitric oxide, helium or helium mixtures. This may affect
patient air flow and volume measurements.
NOTE
Any serious incident that has occurred in relation to this device should be reported
to the competent authority and the manufacturer.
2.2
Electricity — Warnings and Precautions
WARNING!
Risk of Electric Shock
High voltage contact may cause cardiac arrhythmia.
•
Do not operate the Vivo 2 if it has a damaged power cord, power supply or casing.
•
To avoid electrical shock, only clean the Vivo 2 according to instructions in this
manual. Do not soak or immerse the Vivo 2 into any fluids.
•
Use the approved power supply units only.
Use of unapproved power supply units may compromise the electrical isolation
and lead to risk of electric shock.
•
Do not use more than one multiple portable socket-outlet or extension cord.
If a multiple portable socket-outlet is used, it must not be placed on the floor.
•
The operator must not touch accessible contacts of connectors and the patient
simultaneously.
•
Nurse Call must only be connected to a safety extra low voltage system with an
isolation from mains voltage which complies with the requirements of IEC
60601-1.
18
Safety Information
User manual
Doc. 007229 D-3
Advertisement
Table of Contents
