Replacing Engine Oil Filter Cartridge - Kubota SSV65 Operator's Manual

72 REGULAR CHECKS AND MAINTENANCE WORK
2. Remove the drain plug from the oil drain hose and
drain all oil.
3. Reinstall and tighten the drain plug.
4. Return the oil drain hose to the storage location, attach
the under cover, and retighten the bolts.
(1) Oil drain hose
(2) Drain plug
5. Fill up with new oil through the filling port to the
specified level.
(1) Oil filling port (A) Required oil level range
(2) Engine oil dipstick
Engine oil volumes
(with engine oil filter)
SSV65 7.5 L
SSV75 10.0 L
BReplacing Engine Oil Filter Cartridge
1. Pull the lever and open the rear door.
2. Loosen the bolts and slide the under cover on the
bottom of the frame.
3. Replace the oil filter cartridge at the same time as
doing the engine oil change.
4. Remove the cartridge with the filter wrench.
(1) Oil filter cartridge
(2) Under cover
(3) Bolts
5. Oil the O-ring of the new oil filter cartridge lightly. Then
tighten the oil filter cartridge by hand.
6. Return the oil drain hose to the storage location, attach
the under cover, and retighten the bolts.
7. Fill engine oil to the specified level.
8. Let the engine run for approx. 5 min. and make sure
that the engine oil indicator lamp does not light up.
Then stop the engine and remove the key.
9. The engine oil level is reduced by the amount of the
filter capacity after the engine is started. It is necessary
to add oil.
A Always check the oil level after having exchanged the
filter.
(A) Slide