Lifting The Machine - Kubota SSV65 Operator's Manual

44

LIFTING THE MACHINE

LIFTING THE MACHINE
To avoid serious injury or death:
A The instructions for safe lifting are described
here. Read these instructions carefully before
lifting the machine. Make sure that the
operating personnel
manual carefully before lifting.
A Select a firm level surface, lower the working
equipment to the ground, stop the engine, set arm rest
to locked position and apply parking brake switch so
the unit cannot roll.
A Do not lift loads that exceed the maximum rated
capacity of the hoist and attaching hardware.
A Do not enter and do not allow others to enter the
working area under the suspended load and do not
move the load over people. The load must only be
moved in an area where the equilibrium can be
maintained.
A Always inspect the attaching hardware, including
chains, hooks and lifting devices before each use. Do
not use any worn or damaged attaching hardware. Do
not use if the safety latch is missing.
A Do not use attaching hardware, including chains and
hooks, in extreme temperature or other environmental
conditions that exceed
specifications.
A Load disengagement can cause severe injury or
death. The use of a hook with a safety latch does not
preclude inadvertent detachment of a slack sling load
from the hook. Visual verification of proper hook or
shackle engagement is required in all instances.
A Comply with all Federal, State and Local regulations
and safety standards before lifting the machine.
A Make sure the lifting chains and hooks are strong
enough to withstand the load being lifted.
A Be sure that the hooks used have safely latch.
A Before lifting, be sure attachments are properly
attached.
Model name
Model Type
Weight * kg
* SSL weight with standard (non-hydraulic) bucket
read the operator's
the manufacturer's
SSV65 SSV75
Open Closed Open Closed
Cab Cab Cab Cab
3080 3200 3700 3820
To avoid personal injury or death:
A Do not use damaged chains, hooks and lifting
devices.
The loader can be lifted with the Single-Point Lift that is
available as a kit from your KUBOTA dealer.
The Single-Point Lift, supplied by KUBOTA, is designed to
lift and support the KUBOTA loader without affecting
rollover and falling object protection features of the
operator cab.
(1) Lifting eye
C Procedure for lifting
1. Lift slowly and vertically.
2. Move the machine slowly into place.