Table of Contents
Advertisement
10
CHECKS BEFORE START
BAUX Port Switch (High-Flow model only)
[High-Flow model only]
To avoid personal injury or death:
A Be
careful
not
incompatible attachment in the High-Flow
mode. Otherwise the attachment may be
damaged.
This switch is used to enable the AUX port and also to
enable the High-Flow mode.
C Engaging and Disengaging the AUX Hydraulic
Low-Flow Mode System
(1) To turn ON the AUX Hydraulic Low-Flow port,
press the " " side of the AUX port switch one
time. On the instrument panel, the " "symbol will
appear.
(2) To turn OFF the AUX Hydraulic Low-Flow port,
press the " " side of the AUX port switch again to
deactivate.
C Engaging and Disengaging the AUX Hydraulic
High-Flow Mode System
(1) To turn ON the AUX Hydraulic High-Flow port,
press the " " side of the AUX port switch one
time.
On the instrument panel, the " " symbol will
blink.
(2) To turn OFF the AUX Hydraulic High-flow port,
press the " " side of the AUX port switch again to
deactivate.
(1) AUX port switch (High-Flow model only)
(2) AUX operation lamp
to
use
any
High-Flow-
BWorking Light Switch
This switch is operative with the starter key in the ON
position.
The switch has 3 positions. When positioned on the lower
side, the lights stay off. Move the switch to the middle
position to turn on the front working light, the front corner
lights, and the rear tail lights. Position the switch to the
upper side to turn on both the front working lights, the
front corner lights, the rear tail lights, and the rear working
lights.
(1) Working light switch
C Night operation
To avoid personal injury or death:
A Visibility is reduced in darkness, therefore, in
the event, the working light alone does not
provide sufficient visibility. Prepare additional
stationary artificial lighting, observe all safety
rules and any special regulations for night
work.
Advertisement
Table of Contents
