Table of Contents
Advertisement
94
LONG STORAGE
Periodic replacement of important component parts
To ensure safety in operation, you are strongly requested to inspect and service the machine at regular intervals. For added
safety, ask your KUBOTA dealer to replace the following important component parts.
These parts are prone to degradation in material or subject to wear and tear with time. It is difficult to judge how much they
have been affected at regular inspection. It is therefore necessary to replace them with new ones, whether wear is visible
or not after a specified time of use.
If any are found worn even before the specified use, they must be repaired or replaced.
If any of the hose clamps are found deformed or cracked, they must also be replaced.
For the hydraulic hoses other than the ones to be replaced periodically, inspect them for the following points. If found
unusual, tighten them up, replace them.
When replacing the hydraulic hoses, change their O rings and sealings with new ones.
For replacement of the important parts, contact your KUBOTA dealer.
A At the following periodic inspections, check the fuel hoses and hydraulic hoses as well.
Inspection Interval
Daily Checks
Every month
Every year
List of important component parts
No.
Component parts
1
Fuel hose
2
Hydraulic hose
3
Radiator hose
4
Closed breather related rubber piping
DPF differential pressure sensor rubber piping
5
(Front and Back)
Suction pipe downstream the AFS
6
(Air Flow Sensor)
7
Boost sensor pressure rubber piping
8
Intake air line
To prevent serious damage to the hydraulic system, use only a KUBOTA genuine hydraulic hose.
Leak at fuel and hydraulic hose connections and points
Leak at fuel and hydraulic hose connections and points
Damages at fuel and hydraulic hose (cracks, chafing)
Leak at fuel and hydraulic hose connections and points
Interference, deformation, degradation, twist and other damages (cracks, chafing) of fuel and hydraulic
hoses
Every 2 years or
4000 hours
Check points
Period
Advertisement
Table of Contents
