40
OPERATION OF THE MACHINE
HYDRAULIC QUICK-HITCH (OPTION)
BAttaching Attachments
A Attachments should be located on a level, firm surface
when attaching and detaching them from the quick-
hitch.
1. Push
the
hydraulic
"UNLOCKED" position and hold it until the levers are
up ("UNLOCKED" position) completely.
(1) Hydraulic quick-hitch switch
(1) Quick-hitch lever
quick-hitch
switch
in
(A) "UNLOCK" position
(B) "LOCK" position
(A) "UNLOCK"
2. Position the machine squarely in front of the
attachment and tilt the quick-hitch forward with the tilt
cylinders.
the
(1) Quick-hitch
3. Ease the quick-hitch mounting plate into the saddle of
the attachment.
4. Roll the quick-hitch back using the tilt cylinders and
raise the lift arms slightly. The back of the attachment
should rest against the front of the quick-hitch
mounting plate and the weight of the attachment
should be supported by the lift arms.
(1) Quick-hitch