54
MAINTENANCE
4. Slowly raise the cab until the cab is all the way up and
the stopper latching in engages.
A The required force to lift the cab is affected by the
temperature.
(1) Cab
(2) Stopper
5. Set the stopper lock to the lock position.
(1) Stopper lock
(A) "RAISE"
(B) "ENGAGE"
(A) Lock
C Lowering (Tilt down)
1. Set the stopper lock to the release position.
(1) Stopper lock
2. Support the cab and release the stopper.
3. Lower the cab slowly all the way down.
4. Tighten the lock bolts with correct tightening torque.
(1) Stopper
(2) Lock bolt
C Tightening torque:
77.5 to 90.2 N-m
(A) Release
(A) "RELEASE"