Tilt Steering Wheel; Head Light Switch; Head Light Switch; Headlight-High Beam Indicator - Kubota RTV-X900G Operator's Manual

3. Adjust steering position.
BTilt Steering Wheel
[if equipped]
Adjust the steering wheel to proper position. The steering
wheel can be adjusted while the tilt lever is pulled.

(1) Tilt lever

(P) "PULL"
OPERATING THE VEHICLE
4. Selecting light switch position.
BHead Light Switch
The head light switch is operative when the key switch is
in either the "ON" or "OFF" position.

(1) Head light switch

(A) Head lights "OFF"
(B) Head lights dimmed, low beam
(C) Head lights, high beam
A Turning the head light switch to the "low beam" or
''high beam'' position causes the following lamps to
light simultaneously.
(1) Tail and number plate lights (lamps at the rear
portions of the vehicle)
(2) Sidemarker light
(3) Lamp built in the hazard light switch
A The head light switch is operative when the key switch
is in the "ON" position.
25