STARTING THE VEHICLE
(1) Door
(2) Door handle
2. Seat belt
Be sure to wear your seat belt. Make sure the seat belt
warning lamp is off. When the seat belt of operator side
is not engaged, vehicle speed is limited to 15 mph.
WARNING
To avoid serious injury or death:
• Always wear your seat belts. Seat belts reduce
the potential for injury.
• Always use the seat belts when operating and
riding in the vehicle.
• Passenger must be able to grasp the handhold
with seat belt on and both feet on floor.
Adjust the seat belts for proper fit and connect the
buckle.
Seat belt is an emergency locking retractable type.
(1) Seat belt
3. Tilt steering wheel (if equipped)
Adjust the steering wheel to proper position. The
steering wheel can be adjusted while the tilt lever is
pulled.
RTV-XG850
(A) "UNLOCK"
(1) Tilt lever
4. Head light switch
The head light switch is operative when the key switch
is in the "ON" position.
Turn on the key switch and turn the head light switch
clockwise, the following head lights light up on the
switch.
Turn the head light switch counterclockwise to the
"OFF" position to turn off the head light.
(1) Head light switch
NOTE :
• Turning the head light switch to the "ON"
position causes the following lamps to light
simultaneously.
– Tail lights (lamps at the rear portions of the
vehicle)
OPERATING THE VEHICLE
(P) "PULL"
(A) Head lights "OFF"
(B) Head lights low beam "ON"
(C) Head lights high beam "ON"
31