Aux; General Settings; Synchronization; Hot Backup - NovaStar NovaPro UHD User Manual

4.8.4 AUX

This function is used for auxiliary output of input sources, PVW or PGM. You can output the unprocessed
signal source to the connected display device.
Menu
Status
Select AUX
AUX Scaling
Follow Preset

4.9 General Settings

Figure 4-31 General settings

4.9.1 Synchronization

You can select a synchronization signal to synchronize the cascaded devices.
Step 1
Rotate the knob to select Synchronization and press the knob to enter the submenu.
Step 2
Rotate the knob to set the synchronization status and source respectively.
Menu
Status
Source

4.9.2 Hot Backup

The NovaPro UHD supports two hot backup modes: Set as Primary and Set as Backup. Figure 4-29 shows
a common application for this function.
Menu
Set as Primary
Set as Backup
www.novastar.tech
Description
Set to turn on or turn off the AUX function. The default option is Off.
Select the desired AUX signal source. The options are all input sources, PVW and PGM.
Set the AUX display mode.
Full Screen: Display the image in full screen.

Proportional: Scale the image proportionally and then display it on the screen.

Set whether the AUX follow the preset during switching.
On: If there is AUX data in the preset, the AUX input source will be switched during

preset switching.
Off: The AUX input source will not be switched during preset switching.

Description
Set to turn on or turn off the synchronization function. The default option is Off.
Select GenLock or other input sources as the sync source.
Description
In device backup applications, when the device is set as the primary device, it cannot
be used for Ethernet port backup.
In device backup applications, when the device is set as the backup device, it cannot
be used for Ethernet port backup.
NovaPro UHD All-in-One Controller User Manual
20