Table of Contents
Advertisement
Navigating the Menu System
Menu Indicators
Table 3.3
Indicators found in the Control Panel Menu systems
Indicator
=
This indicator only appears after options which take a specific
setting—it indicates that a value or setting follows the option.
The example at the right tells you that Language is an option that takes a
specific setting. One setting for the Language option is Français.
Another setting is English. (The list of available settings is displayed one
setting at a time on the bottom line of the display as you press Value
Up
or Value Down
*
This indicator identifies the current value setting.
The example at the right tells you that Language is currently set to
English.
Pressing Value Up
values.
Control Panel Locks
3-10
DP N24, N32 and N40 System Administrator Guide
Two menu indicators (= and *) are used to furnish information
about menus and settings. The purpose of each indicator is
described in Table 3.3 below.
Purpose
.)
or Value Down
scrolls through the possible
Some of the menus in the Control Panel can be locked to prevent
unauthorized access to critical system parameters (refer to
CentreWare DP documentation). If you scroll to a locked menu,
pressing either Item key causes the menu name to appear on the top
line of the display and "Menu Locked" to appear on the second line.
The following menus cannot be locked:
•
Job Menu
•
Password
•
Tray Menu
•
Test Menu
•
Reset Menu
If you do not want users to have access to the Reset Menu, power
OFF and power ON the printer.
Example
L a n g u a g e
=
F r a n ç a i s
L a n g u a g e
=
E n g l i s h
*
Advertisement
Chapters
Table of Contents
