Table of Contents
Advertisement
4.2
Setting media
4.2.5
Set the media core to the rewinder spindle
1
Cut the section in which both edges of the tip of the media are cut.
2
Place the new media core on the rewinder spindle.
% Set the media core with its edge adjusted with the position of 330 mm/12.99" of the scale on the
rewinder spindle.
3
Adhere the media to the media core with masking tape.
NOTICE
Be sure to attach in three positions, center, back, and front in the order to equalize the tension on the
front and back.
Make sure the media is securely adhered to the media core. Otherwise, the media may lean to one side.
AccurioLabel 230
2
1
3
4
4-13
Advertisement
Table of Contents
