3
Printing workflow
This section describes the basic printing workflow using this machine.
First check the basic flow to print data, then add detailed setting and adjustment steps according to usage
applications.
d
Reference
For details on various settings and adjustment procedures of this machine, refer to the [User's Guide].
1. Before Printing
Cleaning
Be sure to clean and adjust the machine before starting operation.
Prepare the Media
Set or change the media.
Prepare the Machine
Prepare the machine to print.
Adjust (Image Position and Image Quality)
Adjust the image position and image quality before printing.
2. Job Printing
Prepare Print Data
Create a print job.
Save a Job
Send the job to this machine.
Print a Test Page
Print a test page before printing a job. Adjust the image position and image quality as necessary.
Print All Pages
Print all pages of the job.
3. Operation After Printing
Replace the Media Core
Remove the media after printing and install a new media core.
Idle the Machine
Turn off the sub power of the machine and idle it.
AccurioLabel 230
3
3-3