Konica Minolta AccurioLabel 230 Quick Manual page 83

4.2 Setting media
3
Adjust the position of the sensor unit to make the value of the web guide ±0.0.
% Loosen the left knob of the web guide to move the sensor unit back and forth. When you move the
sensor unit to the front and to the back, the value is changed to the minus and plus directions, re-
spectively. After adjustment, tighten the knob to fix it.
4
Press the manual mode key of the web guide.
5
Open the top cover of the leading section of the main body of the printer.
AccurioLabel 230
4
4-15