Trouble Of Optional Products; The Operation Of The Knife Is Slow - Konica Minolta AccurioLabel 230 Quick Manual

6.7

Trouble of optional products

6.7 Trouble of optional products
6.7.1

The operation of the knife is slow

Follow the procedures below to solve the problem:
STEP 1: Check the Shaft of the Knife
 If it is dirty, wipe it with a cloth, etc. After cleaning, apply grease to the shaft. Clean the shaft once
a month.
STEP 2: Check the Status of the Compressor of the Knife
 If the compressor is dirty, clean it.
% For details, refer to page 5-23.
AccurioLabel 230
6
6-27