Table of Contents
Advertisement
3
8
Select the output mode and press [OK].
The printed job stops at the position specified for [Stop Position 3].
NOTICE
Adjust the timing for Stop Position 3 in order to reduce the damage of paper or improve the performance
of conveyance. For details, refer to the [User's Guide].
Depending on the media, using the [Stop Position 3] mode may result in the media deforming or the
adhesive running out. In such cases, print test pages in [Stop Position 1] or [Stop Position 2]. Contact
the manufacturers about the specifications of the media.
9
Check the test pages visually.
10
Adjust the image position and image quality, if necessary.
% To adjust the image position, go to page 3-8.
% To adjust the image quality (color shade), use the following functions. For details, refer to the [User's
Guide].
Tone Curve Adjustment
Spot Color
Use Alternative Color Conversion
% If no adjustment is necessary, go to page 3-29.
3-28
Job printing
3.2
AccurioLabel 230
Advertisement
Table of Contents
