Konica Minolta AccurioLabel 230 Quick Manual page 86

4
12
Replace the media wound by the media core of Roll Winder RW-210.
% This procedure is necessary for removing the media wound being misaligned and replacing the me-
dia. For the steps, refer to page 4-29.
13
Press [Nip On/Off] on the "Stop" screen of the touch panel to fix the media.
The black circle and lateral line indicate the roller and media, respectively. When you fix the media, the
media is displayed in red.
14
Press [Unwind mandrel On/Off] and [Rewind mandrel On/Off] to fix the media.
When the media is fixed, [-] is displayed in the circle.
15
Press [Start].
4-18
Setting media 4.2
AccurioLabel 230