Table of Contents
Advertisement
6.1
Replenishing toner supply
6
Troubleshooting
6.1
Replenishing toner supply
When toner supply from the toner bottle becomes less than 1%, the following message will appear in the
message area of the screen.
[No toner / Please add toner (K)]
The toner color indicator to be supplied lights in yellow in the [Consumable/Scrap] indicators area of the MA-
CHINE screen.
On bottom right of the MACHINE screen, the replenish toner icon is displayed.
When toner supply becomes less than 1% during printing, the current job can be continued (maximum 300 m
/ 984.24'). Other job cannot be printed unless the toner is replenished. Jobs can be accepted.
The current job stops when the toner becomes empty.
Toner bottles can even be replaced during printing.
Before replacing a toner bottle, be sure to check the toner type number indicated on the front of toner bottle
inlet, and use a toner bottle of the same number. Using wrong toner bottles may cause machine trouble.
Put a used toner bottle into the cover that is used for a new toner bottle, and pack it into the packing box.
For the subsequent treatment, please contact your service representative.
7WARNING
-
Do not throw toner or a container that contains toner (e.g., toner cartridge and developing unit)
into an open flame. The hot toner may scatter and cause burns or other damage.
AccurioLabel 230
6
6-3
Advertisement
Table of Contents
