Table of Contents
Advertisement
7
7.1.3
Roll Winder RW-210
External machine items
No.
Name
1
Main power switch
2
Nip safety cover
3
Safety cover
4
Inspection table
5
EMERGENCY STOP
6
Control panel
7
Front door (safety door) handle
8
Front door (safety door)
9
Web guide cover
10
Rewinder spindle
7-10
Name of each component
Description
Turns ON/OFF the main power of Roll Winder RW-110
and Roll Winder RW-210.
Protects the nip rollers in Roll Winder RW-210. Opened
when setting or replacing the media. If it opens during the
media conveyance or print, the machine stops in emergen-
cy.
Protects the rollers in Roll Winder RW-210. Opened when
setting or replacing the media. If it opens during the media
conveyance or print, the machine stops in emergency.
Used to check the printing status of the media. You can
turn on the light by operating the touch panel.
Press to stop this system in emergency. Use only in case
of emergency.
To release the emergency stop status, turn the knob of
EMERGENCY STOP to the right to return the button to its
original position.
Do not use it to stop normal printing. It may result the ma-
chine and media being damaged.
Operates and sets Roll Winder RW-110 and Roll Winder
RW-210.
Pulled to the left to open the front door (safety door).
Protects the rollers in Roll Winder RW-210. Opened when
setting or replacing the media.
Protects the web guide. Remove it to operate the web
guide.
Winds the media.
7.1
AccurioLabel 230
Advertisement
Table of Contents
