Table of Contents
Advertisement
5
Follow the procedures below to timely check for adhesive and perform cleaning.
1.
Open the nip safety cover of Roll Winder RW-210 and make sure that no adhesive has stuck to the
nip roller. If any adhesive sticks to the parts, clean them. For details, refer to page 5-9.
2.
Make sure that no adhesive has stuck to Roll Winder RW-110, leading section, delivering section,
or the machine interior. If any adhesive sticks to the parts, clean them. For details, refer to page 5-5,
page 5-12.
3.
When cleaning the machine, be sure to turn off all of the main power switch and sub power switch
of the main body, and the main power switch and sub power switch of Roll Winder RW-110/Roll
Winder RW-210.
5-4
Cleaning parts and intervals
AccurioLabel 230
5.1
Advertisement
Table of Contents
