Table of Contents
Advertisement
5
5.2.4
Adjust the position of the media
Adjust the positions of the media before operating the machine.
NOTICE
When cleaning is complete, be sure to adjust the positions of the media. Otherwise, the media may meander
or move sideways while being fed.
If the media of the rewinder spindle is wound being misaligned, replace the media. For details, refer to the
following page.
Replacing the media core: page 4-29
1
Turn on Roll Winder RW-110/Roll Winder RW-210 to display the "Stop" screen on the touch panel.
% For how to turn on the power, refer to the following page.
% ON/OFF of Roll Winder RW-110/Roll Winder RW-210: page 2-7
2
Press [Unwind mandrel On/Off] on the "Stop" screen to release the fixture of the media.
If [-] is displayed in the circle, press the button to hide [-].
3
Align the edge of the media with 330 mm/12.99" of the scale of the unwinder spindle.
4
Press [Unwind mandrel On/Off] on the "Stop" screen of the touch panel to fix the media.
When the media is fixed, [-] is displayed in the circle.
5-10
Daily cleaning
5.2
AccurioLabel 230
Advertisement
Table of Contents
