Set The Media To The Main Body - Konica Minolta AccurioLabel 230 Quick Manual

5
5.3.2

Set the media to the main body

NOTICE
Before starting the work, turn on the main power switch and sub power switch of the main body, and the
main power switch and sub power switch of Roll Winder RW-110/Roll Winder RW-210.
1
Pull out about 1.5 m of media from Roll Winder RW-110 to the main body of the printer.
2
Open the top cover of the leading section of the main body of the printer.
3
Pass the edge of the media between the tension roller 1 and tension roller 2.
4
Pass the media on the tension roller 4 and then between the tension roller 4 and tension roller 5.
5-18
Weekly cleaning 5.3
AccurioLabel 230