Additional Printing On The Media With Eye Mark Printed - Konica Minolta AccurioLabel 230 Quick Manual

4.6

Additional printing on the media with eye mark printed

4.6 Additional printing on the media with eye mark printed
This section describes the procedure to detect the eye mark printed on the front or back surface of the media
and execute additional printing.
Tips
-
When the optional External Sensor Kit ES-101 is installed, this function can be used.
Workflow
Conditions of detection of eye mark: page 4-36
Install External Sensor Kit ES-101: page 4-36
Turn on the additional printing function: page 4-44
Confirm/change the teach-in mode: page 4-45
Adjust the sensor position: page 4-46
Adjust the position of the media: page 4-47
Adjust ES-101: page 4-48
Print test pages: page 4-55
Adjust the additional printing position: page 4-55
Print all pages: page 4-56
AccurioLabel 230
4
4-35