Installing Es-101 (When Checking The Eye Mark In The Upper Side Of The Media) - Konica Minolta AccurioLabel 230 Quick Manual

4.6 Additional printing on the media with eye mark printed
2
Remove two screws from the leading section to remove ES-101.
Remove it by holding ES-101 with hand.
3
Remove the rotation knob from ES-101.
4
Turn the nut of the sensor cable and remove the sensor cable from ES-101.
Installing ES-101 (When checking the eye mark in the upper side of the me-
dia)
When checking the eye mark in the upper side of the media, install ES-101 to the upper side of the leading
section.
AccurioLabel 230
1
2
4
4-37