Konica Minolta AccurioLabel 230 Quick Manual page 94

4
3
Press [Unwind mandrel On/Off] on the touch panel to fix the media.
When the media is fixed, [-] is displayed in the circle.
4
Cut the overlapping part of the media with following the cutter groove on the workbench.
% After cutting, remove the overlapped part.
Be careful not to cut your hand when cutting the media.
5
Stick the joint part of the media from the back side with masking tape.
% Stick to protrude the masking tape from both ends of the media.
4-26
3
2
1
Replacing the media
4
AccurioLabel 230
4.3