4
5
Close the cover of leading section.
Installing the reflection holder (When checking the eye mark in the lower side
of the media)
1
Install the reflection holder to the sensor holder.
Install the sensor holder with Up engraved.
2
Open the cover of the leading section.
3
Install the assembled reflection holder to the upper sensor slider and fix it with two screws.
Align the longitudinal position of the reflection holder with the position of the eye mark.
4
Install the rotation knob.
5
Close the cover of leading section.
4-54
Additional printing on the media with eye mark printed
4.6
AccurioLabel 230