Table of Contents
Advertisement
5.3
Weekly cleaning
Be careful not to cut your hand when attaching or detaching the leaf spring (front) and the leaf spring
(back).
NOTICE
Glue sticking to the conveyance section can cause a feeding error. Be sure to insert paper first.
The leaf spring (front) has a round protrusion, while the leaf spring (back) does not. Make sure to use
the correct springs when attaching them.
Do not apply too much force when attaching or detaching the leaf spring (front) or the leaf spring
(back). Doing this can cause deformation of the springs.
11
Clean the leaf spring (front) and the leaf spring (back).
% Firmly clean the springs as adhesive easily sticks to them.
12
Follow the reverse procedure to detach the leaf springs, attach the leaf spring (front) and the leaf
spring (back).
% After attaching, make sure that both leaf springs are hooked up.
AccurioLabel 230
5
5-15
Advertisement
Table of Contents
