[Debug/Settings] Screen - Konica Minolta AccurioLabel 230 Quick Manual

2

[Debug/Settings] screen

This section describes the [Debug/Settings] screen.
No. Name
1 [Rew Dancer Pot]
[Unw Dancer Pot]
[Rew Tension Pot]
[Machine Speed Pot]
[Max. Rew. Diameter(mm)]
2 [Rew Dancer Arm Top Sensor]
[Unw Dancer Arm Top Sensor]
[Nip Inductive Sensor]
[Rewinder Inductive Sensor]
[SafetyOK Status Monitor]
3 [DC330 Inline with Buffer]
[DC330 Inline_no_Buffer]
[Low Unwind Detection]
[Web Break Detection]
[Inspection Lamps]
2-16
Description
Displays the value of the potentiometer of the winding
dancer arm.
If the value is not within the range of "890±5", contact your
service representative.
Displays the value of the potentiometer of the feeding
dancer arm.
If the value is not within the range of "890±5", contact your
service representative.
Displays the value of the potentiometer of the winding ten-
sion.
Adjust the value to "200" with the tension adjustment dial.
Displays the value of the speed potentiometer of the ma-
chine.
Sets the maximum value of the diameter to wind the me-
dia. If the diameter of the media of the rewinder spindle ex-
ceeds the specified value, feeding stops.
Switches ON/OFF of the sensor at the top of the winding
dancer arm. This is not available on this machine.
Switches ON/OFF of the sensor at the top of the feeding
dancer arm. This is not available on this machine.
Switches ON/OFF of the nip sensor. Keep it on during op-
eration for this machine.
Switches ON/OFF of the winding sensor. This is not avail-
able on this machine.
Switches ON/OFF of the safety monitor. Keep it on during
operation for this machine.
Switches ON/OFF of the DC330 in-line with buffer. This is
not available on this machine.
Switches ON/OFF of the DC330 in-line without buffer. This
is not available on this machine.
Switches ON/OFF of low feeding detection. Keep it on dur-
ing operation for this machine.
Switches ON/OFF of web break detection. Keep it on dur-
ing operation for this machine.
Switches ON/OFF of the inspection lamps of the inspec-
tion table.
Machine panel 2.2
AccurioLabel 230