Table of Contents
Advertisement
2
Turn the main body off
NOTICE
Be sure not to turn off the main power switch in usual operation.
Be sure not to turn off the main power switch before turning off the sub power switch.
Be sure not to turn off the main power switch while the following messages are displayed after turning off
the sub power switch. Turning off the main power switch when the following messages are displayed may
cause serious machine trouble such as toner fixation.
[Cooling in progress / Power is turned off automatically]
[Power off in progress / Please do not turn the main power off]
When turning the main power switch on immediately after turning it off, turn the main power switch off,
check that the power LED on the control panel is out, and be sure that at least 10 seconds have passed be-
fore turning the main power switch on. If the main power switch is turned on again within 10 seconds, the
machine may not operate properly.
1
Turn OFF the sub power switch.
The sub power switch is located on the top-right surface of the main body. The touch panel and all
the LEDs on the control panel other than the power LED will go out, and the power LED will turn from
green to red.
% When the machine is under control of the Weekly Timer function, do not turn off the sub power
switch. Turning off the sub power switch will deactivate the Weekly Timer function.
2
Turn OFF the main power switch.
The main power switch is located inside the main body and can be reached from the left side door.
2-6
OFF
ON
OFF
ON
Power-on/off
2.1
AccurioLabel 230
Advertisement
Table of Contents
