Table of Contents
Advertisement
3
[Zoom]/[Image Shift] adjustment
The magnification and printing position in up and down directions can be finely adjusted. The adjustment
data can be entered directly in percentage terms or in numerical terms to shift.
1
Press [Registration Adj.] on the MACHINE screen.
The "Registration Adj." screen is displayed.
2
Use the touch panel keypad, [,], [+], or the keypad on the control panel to enter [Zoom].
% For the adjustment of [Zoom], check it at the center of the page.
% Press [Vertical] or [Horizontal] below [Zoom] and then enter a value. [Vertical] adjusts the magnifica-
tion in the crosswise direction. [Horizontal] adjusts the magnification in the paper feed direction.
% To enlarge the printing side, enter a positive value, and to shrink it, enter a negative value.
% Adjustment range: For both [Vertical] and [Horizontal], -1.00 to +1.00 (1 step = 0.01%)
% Use [+/-] to specify the value to be positive or negative.
% Press [Clear] to reset the value.
% Adjustment example of [Zoom]: When the printed image is vertically enlarged to 10.1 mm/0.4"
against the original image of 10 mm/0.39", press [Vertical], and then press in the order of
[1] [0] [0] [+/-] to specify -1.00. The image reduces by 1%.
3
Use the touch panel keypad, [,], [+], or the keypad on the control panel to enter the value of [Image
Shift].
% For the adjustment of [Image Shift], check it at the center of the page.
% Press [Up/Down] below [Image Shift], and then enter a value.
% To move the printing side upward, enter a positive value, and to move downward, enter a negative
value.
% Adjustment range: For [Up/Down] -10.0 to +10.0 (1 step =0.1 mm)
% Use [+/-] to specify the value to be positive or negative.
% Press [Clear] to reset the value.
% Adjustment example of [Image Shift]: When the printed image is misaligned downward by
0.5 mm/0.2", press [Up/Down], and then press [5] to specify +0.5 mm. The image shifts 0.5 mm up-
ward.
3-18
Before printing
3.1
AccurioLabel 230
Advertisement
Table of Contents
