Table of Contents
Advertisement
7
7.1.2
Roll Winder RW-110
External machine items
No.
Name
1
Front door (safety door) handle
2
EMERGENCY STOP
3
Web guide cover
4
Safety cover
5
Workbench
6
Safety cover
7
Unwinder spindle
8
Remaining media sensor
9
Front door (safety door)
7-8
Name of each component
Description
Pulled to the right to open the front door (safety door).
Press to stop this system in emergency. Use only in case
of emergency.
To release the emergency stop status, turn the knob of
EMERGENCY STOP to the right to return the button to its
original position.
Do not use it to stop normal printing. It may result the ma-
chine and media being damaged.
Protects the web guide. Remove it to operate the web
guide.
Protects the rollers in Roll Winder RW-110. Opened when
setting or replacing the media. If it opens during the media
conveyance or print, the machine stops in emergency.
When replacing the media, cut the media with following the
cutter groove on the workbench. Four magnets for fixing
the media are included.
Protects the rollers in Roll Winder RW-110. Opened when
setting or replacing the media. If it opens during the media
conveyance or print, the machine stops in emergency.
Sets the media.
Detects the winding diameter of the media. When the
winding diameter falls below the detection range of the re-
maining media sensor, the media conveyance stops. The
default detection range is set to 9 mm, which is the clear-
ance between the unwinder spindle and sensor.
Protects the rollers in Roll Winder RW-110. Opened when
setting or replacing the media.
7.1
AccurioLabel 230
Advertisement
Table of Contents
