Adjust The Media Conveyance Position To Solve Meandering And Mis-Centering - Konica Minolta AccurioLabel 230 Quick Manual

6
Adjust the media conveyance position to solve meandering and mis-center-
ing
Adjust the media conveyance position to solve meandering and mis-centering of the media. This procedure
shall be performed after setting the media along the correct route.
1
Open the cover of the web guide of Roll Winder RW-110 and press the center positioning key.
2
Adjust the position of the sensor unit to make the value of the web guide ±0.0.
% Loosen the left knob of the web guide to move the sensor unit back and forth.
% When you move the sensor unit to the front and to the back, the value is changed to the minus and
plus directions, respectively.
% After adjustment, tighten the knob to fix it.
3
Press the manual mode key of the web guide.
4
Open the front door of Roll Winder RW-110.
6-20
-3.4
20.0
M
0.0
20.0
M
0.0
20.0 0.0
A media feeding error occurs
M
0.0
0.0
6.5
AccurioLabel 230