Table of Contents
Advertisement
4
2
Cut the media by keeping the length of the media wound by the media core of Roll Winder RW-210.
NOTICE
Keep such a length that the edge of the media can reach a new media core.
When cutting the paper, be careful not to injure your hands or fingers.
3
Stick the cut media edge to the media with the masking tape.
4
Press [Rewind mandrel On/Off] on the touch panel to release fixture of the media.
If [-] is displayed in the circle, press the button to hide [-].
4-30
Replacing the media core
AccurioLabel 230
4.4
Advertisement
Table of Contents
