2
3
Press [Startup].
The "Stop" screen is displayed.
Turn off Roll Winder RW-110/Roll Winder RW-210
NOTICE
Be sure not to turn off the main power switch in usual operation.
Be sure not to turn off the main power switch before turning off the sub power switch.
When turning the main power switch on immediately after turning it off, be sure to wait for 10 seconds or
longer before turning the main power switch on again. If the main power switch is turned on again within
10 seconds, the machine may not operate properly.
1
Confirm the MACHINE screen on the touch panel.
% If the status display of Roll Winder RW-110 and Roll Winder RW-210 is blue, start from Step 2.
% If the status display is red, start from Step 3.
2-8
Power-on/off
2.1
AccurioLabel 230