Table of Contents
Advertisement
4.6
Additional printing on the media with eye mark printed
4.6.8
Install the reflection holder
To check the eye mark of the media through which sensor light passes such as a transparent film, install the
reflection holder.
Installing the reflection holder (When checking the eye mark in the upper
side of the media)
1
Install the reflection holder to the sensor holder.
Install the sensor holder with Lw engraved.
2
Open the cover of the leading section.
3
Install the assembled reflection holder to the lower sensor slider and fix it with two screws.
Align the longitudinal position of the reflection holder with the position of the eye mark.
4
Install the rotation knob.
AccurioLabel 230
4
4-53
Advertisement
Table of Contents
