Control Panel (Roll Winder Rw-110/Roll Winder Rw-210) - Konica Minolta AccurioLabel 230 Quick Manual

2.2 Machine panel
2.2.2

Control panel (Roll Winder RW-110/Roll Winder RW-210)

Operate the control panel and touch panel on Roll Winder RW-210 to start and change the settings of Roll
Winder RW-110 and Roll Winder RW-210.
No. Name
1 Sub power switch
2 Tension adjustment dial
3 Speed adjustment dial
4 Touch panel
AccurioLabel 230
Description
When you press the sub power switch, the touch panel
starts.
This is a dial to adjust the tension of the torque. When start
printing, make adjustments by turning the tension adjust-
ment dial.
Make sure the dial is 10 before printing. This is not availa-
ble on this machine.
Operate the touch panel to check the status and change
the settings of Roll Winder RW-110 and Roll Winder
RW-210.
2
2-13