[Taper Tension] Screen - Konica Minolta AccurioLabel 230 Quick Manual

2.2 Machine panel
No. Name
4 [Web cleaner ON/OFF] (optional)
5 [Anti-Static/Ioniser ON/OFF] (op-
tional)
6 [Back]

[Taper Tension] screen

This section describes the [Taper Tension] screen.
No. Name
1 [Taper Tension (%/mm Diameter)]
2 [Rew Dancer Pot (mm)]
3 [Back]
AccurioLabel 230
Description
Switches ON/OFF of the web cleaner. When it is turned on
and off, and are displayed, respectively.
This is operable only when a web cleaner is installed.
Switches ON/OFF of the anti-static ioniser. When it is
turned on and off, and
Used for control of the sub anti-static system and ionizer
of the AC or DC power. This is operable only when an anti-
static ioniser is installed.
The [Stop] screen is displayed again.
Description
Sets the value of the tension of the taper suitable for the
printing media. Switches ON/OFF of the setting.
The tension of the media and torque of the rewinder spin-
dle are adjusted automatically in accordance with the di-
ameter of the media based on the specified value.
The setting shall not be changed during operation.
Sets the diameter of the rewinder spindle. Switches
ON/OFF of the setting.
It has to be changed only if the diameter changes when the
rewinder spindle is replaced.
The setting shall not be changed during operation.
The [Stop] screen is displayed again.
are displayed, respectively.
2-17
2