Paper Supply - Xerox Document Centre 420 User Manual

Paper Supply

Page 3-18
HINT: To save time use the pop-up keypad on the touch
screen instead of the scroll buttons to insert values. Select the
display box for the size selections (the small rectangle to the
left of the scroll buttons) and a keypad will be displayed. Enter
the values and select Save.
- Custom — used to reduce or enlarge a document in non-
equal proportions. Again, 100% and Auto are available to
reset the magnification after using a custom setting.
HINT: When Custom Reduce/Enlarge is selected, the
machine does not rotate the image to match the orientation of
the paper. If Auto Custom Reduce/Enlarge is selected, the
machine does rotate the image.
The media loaded in the paper trays determines the sizes
displayed in the Paper Supply selection on the touch screen.
For example, if transparencies are loaded, a picture of a
transparency is displayed.
When a tray is opened or paper is loaded in to the Bypass Tray,
a pop-up window 'Tray Attributes' will be displayed on the
touch screen. When changing the type or color of stock in the
tray, the tray must be programmed to match the media being
loaded. If the type or color of stock is not being changed, select
Confirm to close the window.
NOTE: For information about loading paper, refer to "Paper
and other media" on page 10-1.
Xerox Document Centre 440/432/430/426/425/420 User Guide