Auto Clear; Low Power - Xerox Document Centre 420 User Manual

Printer/fax/scanner/copier

Hide thumbs Also See for Document Centre 420:

Table of Contents

Select [Auto Clear].

Select [On] or [Off].

If [On] is selected, use the

scroll buttons to set the

timeout period.

Select [Low Power].

Use the scroll buttons to set

the timeout period.

Auto Clear

With the Auto Clear feature enabled, the machine returns to the

default settings after the specified time.

Low Power Mode becomes active after the specified time of

machine non-use. When activated, the Touch Screen is blank

and the Power Saver light is on. When the Control Panel or

Touch Screen is selected, or the Platen cover lifted, the

machine responds within 1 second. All features are available

within 30 seconds.

NOTE: If the Low Power timeout is set higher than the timeout

for Power Save or Auto Off (depending on system

configuration), the machine displays a message that Low

Power cannot exceed Power Save (or Auto Off).

Xerox Document Centre 440/432/430/426/425/420 User Guide