Table of Contents
Advertisement
Streaks, lines, spots OR black, solid,
dotted lines on every other copy
Output is too light or too dark
Xerox Document Centre 440/432/430/426/425/420 User Guide
Symptom
Recommendation
Clean the Document Glass, CVT Glass,
areas under the Platen Cover, the
Document Feeder and the paper guides.
If the machine has been idle for an
extended period of time, or if the Copy/
Print Cartridge is new, begin the job
again.
Run the job from the Document Glass.
Reinstall the Copy/Print Cartridge.
Check the quality of the document. Use
Border Erase or Edge Erase to remove
lines and marks from the edges of the
document.
Load fresh paper.
Check the humidity in the machine
location. Refer to "Specifications" on
page 14-1 for environmental
specifications.
Load fresh paper.
Check the quality of the document.
Select Lighter or Darker on the touch
screen.
Run off more prints until the copy quality
has improved.
Replace the Copy/Print Cartridge.
Page 13-9
Advertisement
Table of Contents
