Delayed Start - Xerox Document Centre 420 User Manual

Printer/fax/scanner/copier

Hide thumbs Also See for Document Centre 420:

Table of Contents

Delayed Start

Load the document.

Select [More Features].

Select [Delayed Start].

Select [ON] - the Delayed

Start screen will be displayed.

Use the up/down scroll

arrows to indicate the hour

and minutes when you would

like the fax to be transmitted.

Select [Save] and then

Delayed Start is mainly used to transmit faxes during off-peak

hours when telephone charges are lower or when sending to

another country/time zone.

Use Delayed Start, to transmit a document to a single

destination, or use a broadcast send or polling operation. Up to

100 delayed send jobs can be programmed at one time,

depending on the size of the documents and the available

memory. Only one delayed poll can be saved at a time. Use the

Fax Job Monitor feature to check the available memory.

NOTE: If a power outage occurs, all pending delay start jobs

will be queued to start immediately once power is restored.

Xerox Document Centre 440/432/430/426/425/420 User Guide