Table of Contents
Advertisement
Changing the Default Time Settings
Select [Access]
the control panel.
Page 2-12
queue (fax receive or network print), or a fax or print job arrives
in the print queue. The machine responds within one second
and all the features are available within 50 seconds.
NOTE: The machine will not exit Power Save (Auto Off/Sleep)
mode if a fax job arrives and the fax enabled trays are empty.
The job will be held in memory until either the control panel is
touched or paper is loaded.
The factory default setting of 60 minutes is customer
changeable within the range of 5 to 240 minutes, depending on
work pattern.
on
Xerox Document Centre 440/432/430/426/425/420 User Guide
Advertisement
Table of Contents
