Table of Contents
Advertisement
Paper Tray Setups
Select [Paper Trays].
Select any button to change
the setting - a description of
each follows.
Make changes as required.
Select [Save].
Auto Tray Switching
Page 11-8
Default Tray
Select the scroll buttons to select the paper supply default
setting - the list contains only the paper trays available with the
machine configuration. The chosen setting will be displayed
prior to other selections made by the user.
If Auto is selected as the default setting, the paper tray is
selected automatically to match the size and orientation of the
originals.
Tray Priority
Select the order in which the machine searches the trays for
available media.
To change the settings, assign a priority to each tray. Number
1 is the highest priority and, depending on how many trays are
available, 4, 5, or 6 will represent the lowest priority, Each
number can only be assigned once.
NOTE: This feature is not available on single tray
configurations.
Use the scroll buttons to select or de-select this feature. On
sets the machine to automatically switch to another paper tray
when the selected tray is out of paper. Another tray must
contain paper of the same size, type and orientation for
automatic switching to occur. To de-select this feature, select
Off.
Xerox Document Centre 440/432/430/426/425/420 User Guide
Advertisement
Table of Contents
