Job Assembly - Copy; Build Job - Xerox Document Centre 420 User Manual

Job Assembly - Copy

Quick Pathway
Select [Features] on
the control panel.
If necessary select
[Copy].
Select [Added
Features]
Select [Job Assembly].

Build Job

Page 3-48
Use the productivity features available in the Job Assembly tab
to program a job. For more information about the features
available refer to the following:
Build Job - page 3-48
Stored Jobs - page 3-50
Use this feature to build a job that requires different settings for
each page. For example, if a set of documents consists of
some pages with text and some with photos, you can select
appropriate settings to be applied to individual pages or
sections of a complete job. By default, Build Job is set to Off.
HINT: To save time use the Build Job Screen instead of the
control panel to program each page.
Xerox Document Centre 440/432/430/426/425/420 User Guide