Xerox Document Centre 420 User Manual page 423

Washout
Solid density variations
Image loss
Output does not reflect the selections
made on the touch screen
The Finisher does not stack output
correctly
Pages in the set are not stapled.
Xerox Document Centre 440/432/430/426/425/420 User Guide
Symptom Recommendation
Check the quality of the documents.
If the image is lighter near the borders,
select a darker Image Quality setting on
the touch screen.
Replace the Copy/Print Cartridge.
Check the quality of the documents.
Select Lighter or Darker on the touch
screen.
Replace the Copy/Print Cartridge.
When copying a document from a larger
paper size to a smaller size, reduce the
image to fit onto the smaller paper size.
If you are using 8 1/2" x 11"size paper,
reduce the document slightly (copying
90% instead of 100%).
Select Auto Center on the touch screen.
Select Save after each selection on the
touch screen that contains a Save
button.
Check to see if the paper tray guides are
locked into position against the paper.
Check to see if the paper tray guides are
locked into position against the paper.
Page 13-11