Table of Contents
Advertisement
Envelope Tray
Enables the printing of addresses on envelopes as an
alternative to using labels. It can hold a maximum of 70
envelopes of 24lb (substance 24) paper at one time. The
envelope tray can only be used in place of tray 1. Refer to
"Paper and other media" on page 10-1 for more information.
High Capacity Feeder (HCF)
This tray is located on the left side of the machine, under the
Bypass Tray and Finisher or Left Tray. The tray can hold a
maximum of 2000 sheets of 20lb (substance 20) paper, 8 1/2"
x 11", long edge feed. Refer to "Paper and other media" on
page 10-1 for more information.
Finisher
The Finisher can stack a variety of paper sizes from 5 1/2" x 8
1/2" through 11 x 17" and can handle a maximum of 1000
sheets of 20lb (substance 20) paper at one time. It can staple
up to 50 pages of 20lb (substance 20) paper in one set. Refer
to "Output" on page 3-10 for more information.
NOTE: The Finisher Stand or the High Capacity Feeder must
also be fitted with the Finisher.
Tower Mailbox
The Tower Mailbox is only available on the Copier/Printer,
Copier/Fax/Printer. On the DC440/432/430/425 each bin can
hold approximately 100 sheets of 5 1/2" x 8 1/2" through 11 x
17" paper. On the DC426/420 each bin can hold approximately
70 sheets of 5 1/2" x 8 1/2" through 11 x 17" paper. Refer to
"Tower Mailbox" on page 8-5 for more information.
Convenience Shelf
This two-tiered shelf attaches to the right hand side of the
machine. The shelf is useful as a work area.
Convenience Stapler
If the Convenience Shelf is fitted, the Convenience Stapler can
also be installed to manually staple documents, or to staple
output if the Finisher option is not fitted. The stapler can handle
a maximum of 50 sheets of 20lb (substance 20) paper. Refer
to page 3-13 for more information.
NOTE: The Convenience Shelf can be installed without the
Convenience Stapler.
Xerox Document Centre 440/432/430/426/425/420 User Guide
Page 2-5
Advertisement
Table of Contents
